Looking for instructions for replacing the drum and blade in the drum cartridge. Are there any resets that need to be performed when just replacing the drum and blade and not the complete unit.
Thanks!!!
Thanks!!!
-
-
Pretty simple.
Replace drum unit. Enter Primary & IP_OFST from the front label on the drum unit. I think it's in *3* (sorry, I haven't seen one of these in a long long time). In *4* run APVC-MR.
The transfer roller gets changed every other drum (~200k). Clean optics. For image quality adjust developer bias. There's a start. =^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Comment