clc3220 front and back problem

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Alessandro72
    Technician
    • Jul 2009
    • 31
    #1

    clc3220 front and back problem

    Hello,
    I have a problem with my copier only when I print in front/back with any type of paper.
    The defect is only present in side front of paper. See attach jpg.
    Someone can help me?

    P.S. I have need new firmware for my copier, my email is: alessandro@cmgrafica.it

    Thanks to all.

    Alessandro
    Attached Files
    https://t.me/pump_upp
    Tags: back, canon, clc3220, front, fuser, jpg, printing, time, toner
    • mrfixit51
      Lead Service Technician

      1,000+ Posts
      • Oct 2008
      • 1975
      #2
      More info please...

      Is the defect that the paper is blistering, is the a glossy coated paper?
      "Once a King, always a King, but once a Knight is enough!"

        Comment

        • Alessandro72
          Technician
          • Jul 2009
          • 31
          #3
          Very thanks for your reply mrfixit51.
          The defect is present with any type of paper coated and uncoated and paper is not wet.
          I can not understand!
          If I print front/back manualy the the problem is not.
          Alessandro
          https://t.me/pump_upp

            Comment

            • Kapten
              Technician

              50+ Posts
              • Apr 2009
              • 52
              #4
              Bk mode or color

              Have you tried in singel color??? And Or BK

              On the picture it seems to be a problem with the starter / drum cartridge.
              Original toner????

              It looks just like the toner is the cheepest on market..
              How is PG 10 looking i one side / 2 side??

              More info please

              Good luck

                Comment

                • Alessandro72
                  Technician
                  • Jul 2009
                  • 31
                  #5
                  Re: clc3220 front and back problem

                  Hi,
                  has been a long time from this post but have not yet managed to solve the problem.
                  I replaced the fuser, the four toner (original canon) cartridge and the four drums (original canon) . I tried with various types of paper, I tried to lower the temperature of the fuser. No one has solved the problem. Now the fault is present, even if I do a manual duplex printing. Do you have any suggestions for me? Thanks to all.
                  https://t.me/pump_upp

                    Comment

                    • mrfixit51
                      Lead Service Technician

                      1,000+ Posts
                      • Oct 2008
                      • 1975
                      #6
                      Re: clc3220 front and back problem

                      Originally posted by Alessandro72
                      Hi,
                      has been a long time from this post but have not yet managed to solve the problem.
                      I replaced the fuser, the four toner (original canon) cartridge and the four drums (original canon) . I tried with various types of paper, I tried to lower the temperature of the fuser. No one has solved the problem. Now the fault is present, even if I do a manual duplex printing. Do you have any suggestions for me? Thanks to all.
                      Please create a new post with your problems! You are replying to a 2 year old message, give all pertinent information in that new posting...
                      "Once a King, always a King, but once a Knight is enough!"

                        Comment

                        Previous template Next
                        Working...