MS-400

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • oldschool
    Trusted Tech

    100+ Posts
    • Mar 2007
    • 245

    #1

    MS-400

    What is the error C-01 for?
    Connected to a FP-300
    Jamex Tech Support: Saving the world one phone call at a time.
  • mrfixit51
    Lead Service Technician

    1,000+ Posts
    • Oct 2008
    • 1975

    #2
    Originally posted by oldschool
    What is the error C-01 for?
    Connected to a FP-300
    You have me scratchin' my head,, isn't that a microfilmer? Good luck finding someone in this forum that works on those
    "Once a King, always a King, but once a Knight is enough!"

    Comment

    • oldschool
      Trusted Tech

      100+ Posts
      • Mar 2007
      • 245

      #3
      I know this post is old but I just wanted to follow up on what I found.
      The clear/stop button was stuck down. If the button is held for 5 seconds it enters a mode to set paper trays C-01. So it wasn't an error at all.
      Jamex Tech Support: Saving the world one phone call at a time.

      Comment

      Working...