Canon counter/ u-send

[Matoku]

for me in recond industries for copier we need to reset the counter to "0" before delivery.not for warranty claim purposses.

[nivssluck]

Thanks lera for the info.

[zoraldinho]

hallo all togehter I`m able to clear the counter pcb on some canon machines, machine speed upgrade on IR 2380 series, u- send upgrade

Hi Lera.You can not clear the counter,becasue counter is on 4 diferent places conected together.Replace pcb with the new one,and the counter is still there.Sorry.

[lera120d]

Hi Lera.You can not clear the counter,becasue counter is on 4 diferent places conected together.Replace pcb with the new one,and the counter is still there.Sorry.

[costd]

I am sure you can, just like I can pee beer - want a drink? I thought this forum was moderated to keep this crap out. Guess not.

[Oze]

for me in recond industries for copier we need to reset the counter to "0" before delivery.not for warranty claim purposses.

Resetting parts counters(while sneaky) is not illegal...tampering with the meters IS however against the law and ranks alongside turning back the odometer on a motor vehicle.

[Oze]

I am sure you can, just like I can pee beer - want a drink? I thought this forum was moderated to keep this crap out. Guess not.

AHAHA....I'd have a drink but the straw makes me gag

[Techace]

hi lera. plz teach me how we can reduce counters of 105 canon only. thanks my email address is raheelh9@gmail.com.

[Brian8506]

Go to the dc controller and cut all the wires that control the counter. That should do it.

[charm5496]

Go to the dc controller and cut all the wires that control the counter. That should do it.

LMAO

[mrfixit51]

Go to the dc controller and cut all the wires that control the counter. That should do it.

Thanks Brian,,, I needed that laugh!

[Matej]

Hi guys.
Lera want to say that you must your screw driver put in pcb and must be sound like schhhhhh and in that case machine is turn off. Your counter on copier be 0 cout becouse you can not see on diplay ..... Hahahahahaha Lera you a sucker... Counter is write at least on 3 diferent places and you can not cracket it to zero . Dont be smart too much. Read some service manual ( if you are a authorized canon dealer) otherwise dont repair Canon.

[hemai2005]

lera is the superman mr matej hahahahaha