ADF Margin problem ir 4570

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • bineeshgeorge
    Trusted Tech

    100+ Posts
    • Jul 2009
    • 107

    #1

    ADF Margin problem ir 4570

    Hai all my friends,

    One of my 4570's image lag about 1 cm. only from ADF and another 4570 shows the same problem from ADF only second side in duplex mode.Please give me your valuable suggestions.........................
  • faxman65

    #2
    DADF N-1

    Try Performing Tray width adjustment.
    In service mode FEEDER>FUNCTION>TRY-LTR OR A4 Move side guides to each size that you use and press ok .... Ok for each size. This can be found in service manual pages 4-14 and 4-15. Hope this helps.

    Comment

    • nazmi_exa
      Technician
      • Nov 2009
      • 24

      #3
      Originally posted by bineeshgeorge
      Hai all my friends,

      One of my 4570's image lag about 1 cm. only from ADF and another 4570 shows the same problem from ADF only second side in duplex mode.Please give me your valuable suggestions.........................
      enter service mode..*28* select FEEDER.. Adjust..select DOCST..and just try to change it value..and try copy using feeder..just change DOCST value either - or + value from all range untill u get the right margin..

      Comment

      Working...