connecting coin op to ircadv series

[Guest]

not sure if anyone can help me or not but im trying to connect
a coin op to the new image runner advance 5030 , using the
control card c-1 interface.

[SCREWTAPE]

not sure if anyone can help me or not but im trying to connect
a coin op to the new image runner advance 5030 , using the
control card c-1 interface.

It should come with instructions.

[charm5496]

try copier>option>acc>cc-spsw to eable control of the coin op over the copier

[ottech]

i have done that , the problem i have is that there is no quick connection
between the coin op and the m/c . In the service manual there is no
indication as to what pin on the interface conn does what, i have
so im kinda stuck , i dont want to blow a working controller board.
there is basically four wires involved, 2 that controll enable/disable
and the other 2 that supply the voltage pulse to tell the coin op
that it has done a copy . Without knowing what pin does what im
dead in the water. so if anyone has connected a coin op this way
please let me know

thanks in advance!!