iR5570

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • toantam
    Technician
    • Nov 2007
    • 63

    #1

    iR5570

    Dear somebody!
    I've iR5570, it alway display replace toner cartrigde. But I'd changed develop sensor, hopper motor
    I can't solve my problem.
    Please give me some idea.
    Thanks
  • MrB
    Trusted Tech

    100+ Posts
    • Nov 2009
    • 147

    #2
    What about the Deve unit itself, have you tried that yet
    And the easy one, try a different toner cartrigde..(I know, one of the 1st things to dol ol)

    Comment

    • DadO
      Trusted Tech

      Site Contributor
      250+ Posts
      • Dec 2007
      • 401

      #3
      Did u try to replace hopper sensor? I had a few problem when he fails but work and feed the toner form bottle to the hopper! Imagine that scene when u find more toner under machine then on paper

      Procedure that helps: Remove the toner form the developer and hopper. Clean the atdc sensors in dev and hop (or replace. I didn't have to) and run toner supply.

      Comment

      • rad7845
        Junior Member
        • Mar 2009
        • 6

        #4
        try replacing M9 and DC Controller

        Comment

        • SCREWTAPE
          East Coast Imaging

          Site Contributor
          2,500+ Posts
          • Jan 2009
          • 3396

          #5
          Does The developer fill when Toner-S is performed in Service Mode?

          You Might have a bad DC.

          Comment

          • toantam
            Technician
            • Nov 2007
            • 63

            #6
            thank you so much!
            I'll try to change DC Controller, because last time I'd changed hopper, developer sensor, toner bottle.

            Comment

            • Canuck
              Tech Specialist

              1,000+ Posts
              • Nov 2007
              • 1713

              #7
              Simple question...does the bottle rotate?

              Comment

              Working...