If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
hi,is the copier stuck on this error,can you not clear it via service mode hd clear and test modes.if this does not work you will probably need a new compatible hd,support toll software and firmware to sort it out or call a canon engineer.
how to download ir3300 hard disk software from internet
how to install the software to the hard disk (20Gb)
HOLD DOWN 1 & 9 KEY & POWER UP WHILE HOLDING DOWN KEYS/ keep holding until u see a white box flashing on LCD screen/ RELEASE KEYS> IT WILL TAKE ABOUT 20 MIN TO FINISH CHECKING THE HDD. After check re boot copier see what happens !!!!!
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Comment