Canon IR C3200 set up as printer

[arborphot]

Small start-up office was donated a Canon IR C3200. I have been asked to network as a printer to take burden off small HP printer and am having trouble getting the set-up. I have remote UI established; using a fixed IP; using an ethernet. Not sure what to try next. Is there a way to check if the machine has the optional Color Network Multi-PDL Printer Kit installed? Any suggestions are great appreciated!

[CanoNiR]

Click the button "123" and check the configuration

[teckat]

Small start-up office was donated a Canon IR C3200. I have been asked to network as a printer to take burden off small HP printer and am having trouble getting the set-up. I have remote UI established; using a fixed IP; using an ethernet. Not sure what to try next. Is there a way to check if the machine has the optional Color Network Multi-PDL Printer Kit installed? Any suggestions are great appreciated!

check boot rom in service mode/ print out settings = need N Type with Fiery

[anothertech]

I think you need C type with Fiery, N type with Multi-PDL Printer kit.

[SCREWTAPE]

C type bootrom is require when a fiery is connected. Remember your printing to the fiery not the copier.

[teckat]

I think you need C type with Fiery, N type with Multi-PDL Printer kit.

Your right I miss Typed it
getting too old = (:eye hand coordination)