Canon IR2270 Jam 108 at PS14

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • cweber0531
    Technician

    50+ Posts
    • Nov 2007
    • 71
    #1

    Canon IR2270 Jam 108 at PS14

    Hey guys,

    Having a jam issue on this machine. Consistently jamming 108 at PS14. Fuser is at 80k. All mods have been done to paper delivery. Any ideas what it could be?
    Tags: 108, 250, 270, canon, color, copy, fixing, fuser, ir2270, issue, jam, jam 1, jamming, models, mods, pads, paper, photo, support
    • teckat
      Field Supervisor

      Site Contributor
      10,000+ Posts
      • Jan 2010
      • 16083
      #2
      Originally posted by cweber0531
      Hey guys,

      Having a jam issue on this machine. Consistently jamming 108 at PS14. Fuser is at 80k. All mods have been done to paper delivery. Any ideas what it could be?
      Jam 108 delay to the delivery sensor PS14
      Check the operation and condition of the Fixing delivery reverse flapper shown by red arrow
      also check Flapper Damping Pads; FC5-0693-000


      as a last resort Right Door assembly FM2-0250-000

      140..jpg

      check ># 13 horseshoe support guide> FL2-1201-000- for damage /1st paper delivery flapper,pivots on it

      353..jpg
      **Knowledge is time consuming, exhausting and costly for a trained Tech.**

        Comment

        • cweber0531
          Technician

          50+ Posts
          • Nov 2007
          • 71
          #3
          Yeah, it was those pesky pads. Thanks Teckat!

            Comment

            • SCREWTAPE
              East Coast Imaging

              Site Contributor
              2,500+ Posts
              • Jan 2009
              • 3396
              #4
              Been there seen that. Check out my thread http://www.copytechnet.com/forums/ca...on-models.html you'll see a photo of that same issue plus others.

                Comment

                Previous template Next
                Working...