Good Day. I have an ir 5050 that intermittantly has the lcd go blank-green power light stays on-must be rebooted. I have reseated the boot rom, memory, turned multicast discovery off-flashed with latest sys sw.
This seemed to start with a bad ribbon cable in the finisher-e532-cable replacement fixed error codes, but lock up still happens. Not sure if related to finisher, but not ruling anything out.
Thanks in advance!
This seemed to start with a bad ribbon cable in the finisher-e532-cable replacement fixed error codes, but lock up still happens. Not sure if related to finisher, but not ruling anything out.
Thanks in advance!