conon ir1018j download standby

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • jubest
    • May 2025
    #1

    conon ir1018j download standby

    what can i do
    Tags: 133, 337, andb, download, load, replace, solve, standby
    • hemai2005
      Professional Print

      100+ Posts
      • Jan 2010
      • 108
      #2
      your machine needed firmware
      or replace DDR
      any choice will solve the problem
      take care
      sigpic
      Learned a lot will become an expert

        Comment

        • teckat
          Field Supervisor

          Site Contributor
          10,000+ Posts
          • Jan 2010
          • 16083
          #3
          Originally posted by jubest
          what can i do

          what are u trying to do ??
          **Knowledge is time consuming, exhausting and costly for a trained Tech.**

            Comment

            • DAG COPIERS & COMPUTERS
              Senior Tech

              500+ Posts
              • Oct 2010
              • 860
              #4
              Re: conon ir1018j download standby

              Originally posted by teckat
              what are u trying to do ??
              Trying to flash an ir1018j with firmware version 68.01.01 but seem its not compatible, since the machine tells me 'wrong firmware version, use firmware for ir 1018j'. JUst want to know if the firmwares for iR1018, 1020, 1022, 1035 models are NOT compatible with iR1018j.

              Thank you.

                Comment

                • teckat
                  Field Supervisor

                  Site Contributor
                  10,000+ Posts
                  • Jan 2010
                  • 16083
                  #5
                  Re: conon ir1018j download standby

                  Originally posted by DAG COPIERS & COMPUTERS
                  Trying to flash an ir1018j with firmware version 68.01.01 but seem its not compatible, since the machine tells me 'wrong firmware version, use firmware for ir 1018j'. JUst want to know if the firmwares for iR1018, 1020, 1022, 1035 models are NOT compatible with iR1018j.

                  Thank you.
                  -----------------------



                  do u see "j" firmware in SST



                  <Points to note>
                  (1) If upgrading from an older version to v60.03 (or later), the BOOT area is increased.
                  At the same time, the SYSTEM writing start address (FLASH-ROM) is changed.
                  The SYSTEM writing start address is included in the BOOT v60.03 and later, so after BOOT has completed downloading, turn OFF and ON the power, so that the new SYSTEM writing start address is reflected.
                  Upgrade procedures

                  <Without options>
                  1. Overwrite BOOT.
                  2. Check that "OK" appears on the touch panel display. Then, turn OFF and ON the power manually.
                  (Download mode starts.)
                  3. Overwrite SYSTEM.

                  <With OPT16MB>
                  1. Overwrite BOOT.
                  2. Check that "OK" appears on the touch panel display. Then, turn OFF and ON the power manually.
                  (Download mode starts.)
                  3. Overwrite OPT16.
                  4. Check that "OK" appears on the touch panel display. Then, turn OFF and ON the power manually.
                  (Download mode starts.)
                  5. Overwrite SYSTEM.

                  <With OPT32MB>
                  1. Overwrite BOOT.
                  2. Check that "OK" appears on the touch panel display. Then, turn off and on the power manually.
                  (Download mode starts.)
                  3. Overwrite OPT32.
                  4. Check that "OK" appears on the touch panel display. Then, turn off and on the power manually.
                  (Download mode starts.)
                  5. Overwrite SYSTEM.
                  **Knowledge is time consuming, exhausting and costly for a trained Tech.**

                    Comment

                    • DAG COPIERS & COMPUTERS
                      Senior Tech

                      500+ Posts
                      • Oct 2010
                      • 860
                      #6
                      Re: conon ir1018j download standby

                      No Sir, I only see the iR1023 displayed, nothing else.

                        Comment

                        • teckat
                          Field Supervisor

                          Site Contributor
                          10,000+ Posts
                          • Jan 2010
                          • 16083
                          #7
                          Re: conon ir1018j download standby

                          Originally posted by DAG COPIERS & COMPUTERS
                          No Sir, I only see the iR1023 displayed, nothing else.
                          ===================

                          U will need to contact

                          a Canon Service Company > if possible
                          **Knowledge is time consuming, exhausting and costly for a trained Tech.**

                            Comment

                            • laitang
                              Senior Tech

                              500+ Posts
                              • Nov 2012
                              • 627
                              #8
                              Re: conon ir1018j download standby

                              Perhap you need v.80.04

                                Comment

                                Previous template Next
                                Working...