iR2200 HDformat

[Guest]

Hi All,

does any one has a latest HD format file for iR2200

i have a 160gb samsung HD trying to format but HD format file dosent have latest models

pls help

regards

[mrfixit51]

There is no support for a 160 gig Samsung drive in the formatter,, I just checked. You will have to try to edit the .ift file to accommodate your drive...

[lazer]

sys software error

managed to format the HD but now while loading sys software it gives error

[SCREWTAPE]

managed to format the HD but now while loading sys software it gives error

What error?

[charm5496]

depending on how you formatted the HDD it could be set up incorrectly with the partitions. The HDD format through the service support tool sets this up. If you used a PC to format the HDD and still have not modified the .ift file then the SST will not recognize the HDD as a supported device giving you an error.

[mrfixit51]

Formatting, (which in the case of using SST), is really nothing more than writing the partition table, it is not a physical format. It HAS TO BE DONE using SST, no other method will work.

[toantam]

I think you can't use HDD too big, just use 6GB to 40GB.
And you have to use SST to format the HDD

[teckat]

managed to format the HD but now while loading sys software it gives error

Start all over with correct HDD
WM2-5199-000= 5.1 GB HDD part #

ir2200/2800/3300- v45.01

HD-Formatt v00.13 or v00.15

HD-Formatt v00.16-needs at least SST v4.11er

Put HDD 5.1gb in copier/1. Formatt / 2.then do an ALL_HDF