IR8070 Paper scrolls

[abkonnet]

I have break the brass connector of the separation assembly(Supply to charging wires). Is there any resistor inside it(the Plasting housing was broken) are shall i connect directly.

[teckat]

I have break the brass connector of the separation assembly(Supply to charging wires). Is there any resistor inside it(the Plasting housing was broken) are shall i connect directly.

Precision Roller.com
J7854..jpg
Canon ImageRunner 8500 Corona / Charge / Transfer (J7854)
$159.00 US

[abkonnet]

Any supplier From India

[teckat]

Any supplier From India

CALL CANON INDIA

call-centre..JPG

Corporate Office 2nd Floor, Tower A & B,
Cyber Greens, DLF Phase III,
Gurgaon - 122002
Telephone : 0124-4160000
Fax : 0124-4160011


Sales Office
Bangalore Canon India Pvt. Ltd
No.135, 10th Floor,
Brigade Towers , Brigade Road
Bangalore - 560 025
Telephone :080-40079400
Fax : 080-40079401



Chennai Canon India Pvt. Ltd
2nd Floor, Wood Head Centre,
23, Sivaganga Road,
Nungambakkam
Chennai -600034
Telephone : 044-28241951-58
Fax : 044-28241965



Delhi/ NCR Canon India Pvt. Ltd
124, (1st Floor),
Vipul Agora,
MG.Road,
Gurgaon - 122009
Telephone : 0124-4529800
Fax : 0124-4529811
Contact Person: Sandhya Chauhan


Hyderabad/Secundrabad Canon India Pvt. Ltd
Ashok Bhoopal Chambers,
146- A, Sadar Patel Road ,
No. 302,3rd Floor,
Hyderabad/Secundrabad - 500003
Telephone : 040 - 2789 6985- 989
Fax : 040 - 2789 6980



Kolkata
Canon India Pvt. Ltd
3A, 1st Floor,
Shakespeare Sarani,
Kolkata - 700071
Telephone : 033-40110700
Fax : 033 - 40110731
Service Center : 033-40110710 / 711



Mumbai
Canon India Pvt. Ltd
4th Floor, Centre Point,
S. V. Road ( Juhu Road Junction),
Santacruz (W)
Mumbai - 400054
Telephone : 022- 6714 5000 - 01, 03
Fax : 022-2649 6925



Pune
Canon India Pvt. Ltd
410,AB City Towers,
4th Floor, 17 Boat Club Road
Pune - 411001
Telephone : 020-66027744-47
Fax :020-66027748


>http://www.canon.co.in/section/contactus/

or order from
Precision Roller.com
Destination Restrictions: The following countries have restrictions that do not allow us to ship directly. Recipients in these countries will need to work with a freight forwarder in the U.S. or another non-restricted country.

• Afghanistan
• Antarctica
• Bouvet Island
• Brazil
• Christmas Island
• Cocos (Keeling) Islands
• Comoros
• Cuba
• Falkland Islands (Malvinas)
• French Southern Territories
• Guinea-Bissau
• Heard Island and McDonald Islands
• Iran (Islamic Republic of)
• Korea, Democratic People's Republic of (North)
• Libyan Arab Jamahiriya

• Mayotte
• Myanmar
• Nauru
• Nigeria
• Niue
• Pitcairn
• Sao Tome and Principe
• Somalia
• St. Helena
• St. Pierre and Miquelon
• Sudan
• Svalbard and Jan Mayen Islands
• Tokelau
• Venezuela
• Western Sahara

[abkonnet]

Can any body from india arrange the transfer charging assembly?

[abkonnet]

Finally got the new corona unit today and the machine is running well. Tanks Guys. I like to know after how many number of copies i have to restring the corona? what is the defference between black color and gold color wires? which color wire i need to use?

[SCREWTAPE]

Finally got the new corona unit today and the machine is running well. Tanks Guys. I like to know after how many number of copies i have to restring the corona? what is the difference between black color and gold color wires? which color wire i need to use?

I believe its 500k
And you should be using tungsten wire. That's the bronze colored wire. The copper one which you refer to being gold is more for color copiers like, CLC's
Difference is diameter.

[teckat]

FB4-3687-000 >correct wire part #

[mrfixit51]

Finally got the new corona unit today and the machine is running well. Tanks Guys. I like to know after how many number of copies i have to restring the corona? what is the defference between black color and gold color wires? which color wire i need to use?

Glad you have resolved your problem, restring around 500k as Screwtape said, or sooner if copy quality problems arise. Check the Counters tab in service mode to keep track of them, be sure to zero out the count on the wires when you restring, and the wires plus the corona assembly when replacing them. The counters are normally your guide. Replace at 1 million to eliminate strange copy quality problems.

[abkonnet]

Guys again same problem, The unit have made more than 1,00,000 copies. i rewire the string but the problem does not eleminate. One of my friend suggest me to change the Block(Not Done Yet). Now what should i do if the problem doesnot solve after rewiring of string. Pls note the paper scroll is happen in A4 not in A4R.

[teckat]

Guys again same problem, The unit have made more than 1,00,000 copies. i rewire the string but the problem does not eleminate. One of my friend suggest me to change the Block(Not Done Yet). Now what should i do if the problem doesnot solve after rewiring of string. Pls note the paper scroll is happen in A4 not in A4R.

Paper is probably arching over Sep guide / could be a voltage issue on end block
Check connectors on HVT-AC PCB
DID U REPLACE THE PLASTIC GUT WIRE THAT SITS OVER SEP GUIDE ?
FA5-1876-000/WIRE, 0.148MM (50M)

make sure your tray settings are for plain paper

are FEEDER ASSEMBLY belts turning ok

[abkonnet]

FA5-1876-000/WIRE, 0.148MM (50M)

Did u mean the nylon thread passes over it. my unit does not have it.

[mrfixit51]

"1,00,000" I am confused by the number,, did you miss a 0 for 1 million, or is there an extra comma, and you have 100 thousand?

When in doubt, try a NEW corona assembly...

[abkonnet]

100 thousand copies

[teckat]

100 thousand copies

that's all @ 1.00 per copy
us100000dollarsbillobverse.jpg
u must be richest person in town