iR3570 Light Copies & Prints

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • mrfuser
    Service Manager

    Site Contributor
    1,000+ Posts
    • May 2007
    • 1598
    #1

    iR3570 Light Copies & Prints

    Got a strange one. I have a client with an iR3570 that is making very light copies/prints. Tried new drum, cleaning, transfer roller, still light. Any ideas? No errors showing up yet.
    Thanks

    Kelly
    Tags: 140, act, adjustments, amp, cleaning, client, code, copies, developer, door, drum, error, errors, faint, ir3570, light, light copies, one, print, printing, prints, roller, shop, showing, strange, transfer
    • teckat
      Field Supervisor

      Site Contributor
      10,000+ Posts
      • Jan 2010
      • 16083
      #2
      Originally posted by mrfuser
      Got a strange one. I have a client with an iR3570 that is making very light copies/prints. Tried new drum, cleaning, transfer roller, still light. Any ideas? No errors showing up yet.
      Thanks

      Kelly
      check your door assembly position
      **Knowledge is time consuming, exhausting and costly for a trained Tech.**

        Comment

        • SCREWTAPE
          East Coast Imaging

          Site Contributor
          2,500+ Posts
          • Jan 2009
          • 3396
          #3
          Originally posted by mrfuser
          Got a strange one. I have a client with an iR3570 that is making very light copies/prints. Tried new drum, cleaning, transfer roller, still light. Any ideas? No errors showing up yet.
          Thanks

          Kelly
          Laser..
          Also check the laser shutter, it sometimes breaks and slightly blocks the laser when writing to the drum, which will effect the intensity of that laser beam.
          Sometimes when this happens you will not get a error code which would be E100. Check your error history.

            Comment

            • Iommanxman
              Trusted Tech
              • Aug 2009
              • 180
              #4
              Developer?

                Comment

                • roho
                  Senior Tech

                  500+ Posts
                  • Mar 2009
                  • 844
                  #5
                  just a thought-had same senario at a metal shop-cleaned the optics and did the adjustments. It was printing faint as well as copies before adjustment.

                    Comment

                    • SCREWTAPE
                      East Coast Imaging

                      Site Contributor
                      2,500+ Posts
                      • Jan 2009
                      • 3396
                      #6
                      Originally posted by roho
                      just a thought-had same senario at a metal shop-cleaned the optics and did the adjustments. It was printing faint as well as copies before adjustment.
                      RoHO
                      This machine has no optics. It has a contact image sensor unit (CIS)
                      Besides its printing light when they print to it. That eliminates the reader section.

                        Comment

                        • SCREWTAPE
                          East Coast Imaging

                          Site Contributor
                          2,500+ Posts
                          • Jan 2009
                          • 3396
                          #7
                          Originally posted by Iommanxman
                          Developer?
                          Maybe.

                            Comment

                            • hemai2005
                              Professional Print

                              100+ Posts
                              • Jan 2010
                              • 108
                              #8
                              Originally posted by SCREWTAPE
                              Laser..
                              Also check the laser shutter, it sometimes breaks and slightly blocks the laser when writing to the drum, which will effect the intensity of that laser beam.
                              Sometimes when this happens you will not get a error code which would be E100. Check your error history.
                              that's right
                              sigpic
                              Learned a lot will become an expert

                                Comment

                                • teckat
                                  Field Supervisor

                                  Site Contributor
                                  10,000+ Posts
                                  • Jan 2010
                                  • 16083
                                  #9
                                  what is right !!
                                  **Knowledge is time consuming, exhausting and costly for a trained Tech.**

                                    Comment

                                    • Iommanxman
                                      Trusted Tech
                                      • Aug 2009
                                      • 180
                                      #10
                                      I think everyone has lost the plot! It is Friday after all! lol.

                                        Comment

                                        • teckat
                                          Field Supervisor

                                          Site Contributor
                                          10,000+ Posts
                                          • Jan 2010
                                          • 16083
                                          #11
                                          LightsOut1..jpg
                                          **Knowledge is time consuming, exhausting and costly for a trained Tech.**

                                            Comment

                                            Previous template Next
                                            Working...