IR3300i *2&8* no responding? IR3570 firmware needed

[Alan Aya]

forget about service mode for now
try this > forget about *asterisk key for now / turn off main switch> hold down the 1 and 7 key> keep holding both numbers>turn on main switch,while still holding them down> do not let go until u see the main screen and a FIX -IP in top corner of control panel/ then
in common settings>Report Settings> print out a User Data List> check
if your iR3300 System Software and Language Versions match up/ it can cause control panel issues
try and get in service mode now- if u can>COPIER>FUNCTION>SYSTEM>DOWNLOAD and push [OK].
Hook up n' Start up SST and re-load 3300i Firmware ALL

After downloading, the main power switch must be turned OFF/ON and then
the main body must be re-booted. The system software saved in the temporary storage space of the HDD is written in the system area and the flash ROM. The
machine starts with the downloaded system software by turning OFF/ON the main power switch.

Dear Teckat,
About the FIX-IP stuff, does it apply to iR2200/2800/3300? As far as i know it is not working in this models, correct me if i am wrong.

Thanks

[cableties]

As far i itwork on colour screen model

[teckat]

Sorry> Call it/ Normal Power on Mode for 3300/2200/2800/w Crossover cable

Fixed-IP for 2220N(i)/ 3320N(i)/w Crossover cable