How To use SST

[Guest]

Hi all

This is my second post about canon copier Problem.
I have SST software SST Ver 335 (If i am not mistaken), but i dont know how to use the software. How to use it and what hardware do i need when using this software?.

Can i get step by step instructions ?


I also want to asked about Canon IR4570, I just buy one canon IR4570, but the machine dont have Fax. Does anyone know Fax partnumber for this machine? do i just need the fax board or any other part if i want to use fax (other part such as speaker so i can hear dialing tone)? My machine is 220Volt, can i use fax board from 110Volt machine?


Thank you all for your help.

[SCREWTAPE]

SST is used to install firmware. You need firmware, and the hardware would be a laptop and copier.

Not to sure about the fax ??? but the 4570 is discontinued, so finding one fax board might be a little challenging.

[mrfixit51]

Super G3 Fax Board-Q1 9568A002AA

This is what you are looking for, you might try e-bay or Google for it. The kit contained the fax unit, speaker, and some harness wiring.

[dipo_alam]

Thanks guys for all your helps

[mrfixit51]

Thanks guys for all your helps

You are welcome...

[SCREWTAPE]

No problem.