Canon lc-710 squealing noise

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • bobthecopierman
    Technician

    50+ Posts
    • Mar 2010
    • 53

    #1

    Canon lc-710 squealing noise

    Hi Peeps,
    Customer says she replaced the cartridge and all of a sudden fax machine starts making a horrible sound.
    I get there and after it goes through warm up and starts to print from memory it makes a real loud squealing noise.
    I put the old cartridge back in and it makes the same noise. She says it wasnt making the noise with the old cartridge before.
    Sounds like its coming from the area below the cartridge. Everything seems to be moving freely.
    Even took out fixing assy to and it was ok.
    Any ideas?
  • teckat
    Field Supervisor

    Site Contributor
    10,000+ Posts
    • Jan 2010
    • 16083

    #2
    Originally posted by bobthecopierman
    Hi Peeps,
    Customer says she replaced the cartridge and all of a sudden fax machine starts making a horrible sound.
    I get there and after it goes through warm up and starts to print from memory it makes a real loud squealing noise.
    I put the old cartridge back in and it makes the same noise. She says it wasnt making the noise with the old cartridge before.
    Sounds like its coming from the area below the cartridge. Everything seems to be moving freely.
    Even took out fixing assy to and it was ok.
    Any ideas?





    Laser Class 710 / 720i / 730i




    Check the gear assembly (Item 14) in the paper feed section for wear and replace if necessary.

    (This illustration is from Figure 15 in the parts manual)

    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

    Comment

    • teckat
      Field Supervisor

      Site Contributor
      10,000+ Posts
      • Jan 2010
      • 16083

      #3
      also check that the right side registration roller bushing is not out of position > causing the gear driven end of the registration roller shaft to mesh poorly with the main drive gear. Moved the bushing to the correct position.
      **Knowledge is time consuming, exhausting and costly for a trained Tech.**

      Comment

      • bobthecopierman
        Technician

        50+ Posts
        • Mar 2010
        • 53

        #4
        Originally posted by bobthecopierman
        Hi Peeps,
        Customer says she replaced the cartridge and all of a sudden fax machine starts making a horrible sound.
        I get there and after it goes through warm up and starts to print from memory it makes a real loud squealing noise.
        I put the old cartridge back in and it makes the same noise. She says it wasnt making the noise with the old cartridge before.
        Sounds like its coming from the area below the cartridge. Everything seems to be moving freely.
        Even took out fixing assy to and it was ok.
        Any ideas?
        FYI....Turned out to be the Laser

        Comment

        • teckat
          Field Supervisor

          Site Contributor
          10,000+ Posts
          • Jan 2010
          • 16083

          #5
          ckmk.JPG
          **Knowledge is time consuming, exhausting and costly for a trained Tech.**

          Comment

          • vlox

            #6
            Re: Canon lc-710 squealing noise

            I'm also having this issue right now. I just replaced the laser from an HP 2200 because they both have the same hardware. I'm not sure what else the issue could be.

            Comment

            Working...