iR5020i Firmware

[Peter Sim]

Hai all,
need help please.
I need english version language firmware to over write the France language v.56.07
Thank you.

[teckat]

Hai all,
need help please.
I need english version language firmware to over write the France language v.56.07
Thank you.

It Probably already has an English ver. installed =
unless u removed or unchecked English when firmware from SST was installed, u should be able to switch over, see below>

To be able to select different languages on the control display panel of the imageRUNNER, first you have to flash the machine with the different languages that you need. You can do that by installing system software for each language. Then proceed to the the steps below to change the desired language. To Select the Desired Language:
1. Go to Service Mode, *, 2 and 8, *.
2. Select Copier.
3. Select Option.
4. Select Body.
5. Press the right arrow and scroll to the 3rd screen.
6. Select RMT-LANG. For English, it should read en.
7. To change the language, hit the +/- sign until you find the desired language.
8. Select OK.
9. Then power cycle the machine.

[Peter Sim]

It Probably already has an English ver. installed =
unless u removed or unchecked English when firmware from SST was installed, u should be able to switch over, see below>

To be able to select different languages on the control display panel of the imageRUNNER, first you have to flash the machine with the different languages that you need. You can do that by installing system software for each language. Then proceed to the the steps below to change the desired language. To Select the Desired Language:
1. Go to Service Mode, *, 2 and 8, *.
2. Select Copier.
3. Select Option.
4. Select Body.
5. Press the right arrow and scroll to the 3rd screen.
6. Select RMT-LANG. For English, it should read en.
7. To change the language, hit the +/- sign until you find the desired language.
8. Select OK.
9. Then power cycle the machine.

Thank you teckat for your reply.
I don't have the firmware to flash and just go to servivce mode and change to english.And still the same langauge after power cycle the machine
The version for english is 52.01 and only france version langauge is 56.07.
Is possible for me to change to english version?
Thank you.

[teckat]

you don't need new firmware/ Usually the Language in Firmware when installed from SST to printer always includes -J/Japan-E/English-F/France-I/Italian-G/German. unless someone only installed FRENCH through SST.

New version is now up to v59.01/ Canon firmware Language & RUI always supports and installs at least 6 or 7 Languages, unless u choose to un-check them on SST download. If u have a laptop with SST & the 5020i firmware on it , u can check to see if ENGLISH is loaded in there. Other wise u will need to re load firmware, and select English-for RUI & LANGUAGE


do you see an that option in service mode instructions above to select RMT-LANG = EN

[Peter Sim]

you don't need new firmware/ Usually the Language in Firmware when installed from SST to printer always includes -J/Japan-E/English-F/France-I/Italian-G/German. unless someone only installed FRENCH through SST.

New version is now up to v59.01/ Canon firmware Language & RUI always supports and installs at least 6 or 7 Languages, unless u choose to un-check them on SST download. If u have a laptop with SST & the 5020i firmware on it , u can check to see if ENGLISH is loaded in there. Other wise u will need to re load firmware, and select English-for RUI & LANGUAGE





do you see an that option in service mode instructions above to select RMT-LANG = EN

Under the service mode>Display>version>RUI 56.01,MN-cont56.97,Lang-EN-52.01,FR-56.97,DE-52.01,IT-52.01,JP-52.01
I have sst but i dont have the iR5020i firmware,hope Mr teckat can help.
yes.already change to EN Langauge

[teckat]

Under the service mode>Display>version>RUI 56.01,MN-cont56.97,Lang-EN-52.01,FR-56.97,DE-52.01,IT-52.01,JP-52.01
I have sst but i dont have the iR5020i firmware,hope Mr teckat can help.
yes.already change to EN Langauge

Spy glass..jpg
Now I see the problem !!!!!!!!!!!!!!!!!!!!!!
Language and RUI Must Match up/ so your FRENCH matches up ok/ it's your English Language 52.01 & RUI 56.01 that don't match

[Peter Sim]

[ATTACH=CONFIG]5372[/ATTACH]
Now I see the problem !!!!!!!!!!!!!!!!!!!!!!
Language and RUI Must Match up/ so your FRENCH matches up ok/ it's your English Language 52.01 & RUI 56.01 that don't match

Thank you very much, Mr teckat,problem solve.

[teckat]

HatTip_2..jpg
Welcome'