Canon ir3200 & imagepass c1

[teckat]

K, I went into service mode > Display > Version > ....

Dcon - 10.02
Rcon - 04.01
Panel - 00.02
Eco - 41.08
feeder - 4.01
sorter - 4.01
fax - --.--
NIB - 04.00
PS/PCL - --.--
Lips - --.--
SDL- STCH - 03.01
OP-COn - 02.02
MN- CONT 10.01
Boot Rom - 04.10C
Diag - DVC - --.--
RUI - 09.03
Lang EN, FR, DE, IT, JP - 10.01
GDI-UFR --.--

If there is anything else I can lookup and give, please let me know.

U have to have dip switches on your imagePass/ be it a C1 or C2

this is a C1 Pic below>>>
imagepass...jpg

And this is a C2 Pic Below>>>>>>>>>>>>
imagepass2...jpg


You also have very old Software, below is what you should have
System Software
(MN-CONT)v90.03
BootROM v70.01
Language v90.03 (JEFIG)*
RUI v79.04 (JEFIG)*
DC-CON v38.02
R-CON v4.01
G3 Fax Board-M2 v56.01
HD Format v00.22
ALL v90.03 C/N Rev 00a
ALL_HDF v90.03 C/N Rev 00a
DADF-K1 v5.01
Finisher-M1 v4.02
Finisher-N1 v4.01
Saddle Finisher-N1 v4.01
Saddle Finisher-N2 v3.01
*****You or the service tech also need at least Canon Service Support Tool ver._4.04Eq/with this Firmware loaded in it
to update your machine.

sorry for the bad news.

[irtek]

Where are you located in Alabama? I am an Independant tech in central Alabama. I have over 25 yrs experience on Canon copiers. I have several IRC3200 with C1 that I service so if you are in central Alabama I can help out. I can update the firmware and reload C1 software. My rates are reasonable although it will be more time consuming since everything was cleared.

Check you PM for my phone number.