If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Re: iR3300 - just wont print via computer's parallel.
Greetings. I tried following these steps below and noticed that my boot-rom version has anN, but still yet I can't get it to print with the parallel cable.
Please I need help.
Originally posted by sgcopiertech
iR3300 machines can print via parallel port (LPT)
the most probable cause is that just your machine is not equipped to print.
please make sure that the machine has a N or H boot rom.
press * 2 8 *
press copier
press version
check your boot rom vesion
if you see a C behind the version i.e. ( xx.xxC )
then your machine would not be able to print at all.
Comment