Need Help of Canon IR105

[teckat]

Teckat if the clutch have problem why when i run with A4R no problem. Only A4 have problem? By thw way, Last time this IR105, the fixing motor was Using IR8500 fixing motor, once i notice i replace with IR105. after that this 0205,0209 paper jam prob occur...

print speed is different for A4 & A4R

iR105 Fix Motor
FH6-1937-020 M3

8500 Motor looks the same/ different #


but the fix gear unit has same part
# FF6-1017-000= IR8500
# FF6-1017-040= IR105

[addoncopier]

Last time i posted some pic regarding the paper when move into the fixing half way and then look like delay "fly up" after i change the fixing motor, this problem solve...Not the belt problem.... Once this problem solve now become 0205, and 0209. Ok i think i get a new CL9 and change it. The CL9 clutch is it the one in the pic that you show me for the "E069" registration clutch?

[addoncopier]

Teckat, I noticed that there should be a selonoid under the transfer charges, Mine one in IR105 already been removed...Is it causing problem of 0205?

[teckat]

Teckat, I noticed that there should be a selonoid under the transfer charges, Mine one in IR105 already been removed...Is it causing problem of 0205?

This A4 issue with J 0205-0209/ is that while copying/scanning- or from PC network Printing or both/
remind me / is the issue from paper feed out of R/L Front decks or Cassettes or Both.

????? how are these two PAPER SENSOR PCB ASSEMBLYs FG6-1941-020 for cassettes #28 shown in FIGURE 104 INTERNAL COMPONENTS 3 / check wiring & connectors
PS.JPG



CL9-is on VERTICAL PATH DRIVE ASSEMBLY

there is no solenoid on REGISTRATION/TRANSFER ASSEMBLY/ just CL2=FH6-5013-020




imageRUNNER 105

intermittently jams.


Check for a broken wire from the DC Controller, J511 pin A4, to the cassette pick up assembly clutch CL8 (FH6 5014 000).

[addoncopier]

Photo0180.jpgPhoto0182.jpgPhoto0181.jpgPhoto0179.jpg
The selonoid missing one is in the pic (4). While paper jam is (1,2,3) pic. Always jam like this. Side door there just enter registration roller a bit only and enter into fixing a bit also and then duplex....Always this 0205

[addoncopier]

Paper jam occur both network print and copy...usually double side print and double side copy paper jam occur.