IR105 code E013? what is the problem? after still the same. By the way, anyone know that what is the speed of the M2 motor when spinning... 2361 RPM?
-
-
E013
Main cause The waste toner feedscrew is faulty. The waste toner clog detecting switch (MSW2) is faulty. The DC controller PCB is faulty.
Condition
0000 The waste toner feedscrew fails to rotate normally, and the switch MSW2 is pressed multiple times within a specific period of time.
0010 The power is tuned off and then on without clearing the error."Once a King, always a King, but once a Knight is enough!"
-
ok...Done...Thx Mr.Fixit51Comment
-
You are welcome!
"Once a King, always a King, but once a Knight is enough!"
Comment
Comment