IRC3220 Main Unit Auto Adjustment

[Canuck]

If the machine has an Imagepass, you can do a VisualCal. It takes a while but you can get excellent results. Remember its an irc3200, not an Imagepress....don't expect Pantone matching

[teckat]

VisualCal is too slow

[Canuck]

VisualCal is too slow

20 min but you get great results...sometimes better than using reader. 3200 reader is not the greatest

[hknwbec]

Canuck, thanks for your suggestion, I have not used VisualCal before, but I will take a look on this software.

[hknwbec]

Thanks all of you, Main Unit auto adjustment is OK, We tried to used quick adjustment, but copy not desirable.
Afterward we connected the reader , then the copy was acceptable. we only set up W/SCan To 1 and change the value of PASCAL is OK, others no need to change as same value.
As we don't have Imagepass and VisualCal, so this part can not be made.

[SCREWTAPE]

Thanks all of you, Afterward we connected the reader , then the copy was acceptable. we only set up W/SCan To 1 and change the value of PASCAL .

Sometimes ya gotta do what ya gotta do.

Great going.