Canon iR2200 system software

[teckat]

Before u re-load/Check in the 3300 Firmware u have That Your MN-CONT (System Software) & LANGUAGE Versions Must Match exactly.

u have a mismatch shown here below***************
DC-CON: 12.01
R-CON: 07.01
PANEL: 00.02
POWER: 02.01
FEEDER: 06.01
SORTER: 01.05
NIB: 03.00
MN-CONT: 42.03~~~~~~~~~~~~~\
BOOTROM: 26.44H /
RUI: 42.01
LANG-EN: 43.01~~~~~~~~~~~~~/

[Hejsan]

Easy:
Uninstall SST, then navigate to it's installed folder and delete it. I always load mine in the Program Files folder, but if it is installed in it's default location, it is C:\canon\servicesupporttool. Delete that folder. Deleting the C:\servtool folder will get rid of any previous versions of copier system software. Now you are ready to do a clean install of SST and the System Software of your choice afterwards...
4.22 is suitable for your needs...

Thanks! I did everything according to your instructions. Then installed SST v4.22E, then registered iR3300N_v45.01 Firmware and tried to upload. It started uploading and after couple of minutes should be ready :-) I will let you know about the progress.

[Hejsan]

Before u re-load/Check in the 3300 Firmware u have That Your MN-CONT (System Software) & LANGUAGE Versions Must Match exactly.

u have a mismatch shown here below***************
DC-CON: 12.01
R-CON: 07.01
PANEL: 00.02
POWER: 02.01
FEEDER: 06.01
SORTER: 01.05
NIB: 03.00
MN-CONT: 42.03~~~~~~~~~~~~~\
BOOTROM: 26.44H /
RUI: 42.01
LANG-EN: 43.01~~~~~~~~~~~~~/

Thanks teckat! I have noticed the difference. Now it should be the same. Just few minutes left to finish the process. Let's see, what happens :-)

You guys saved my life. Thanks to all of you!

[Hejsan]

Yessss!!! :-) It's working!... Now the "Versions" section looks like this:

DC-CON: 12.01
R-CON: 07.01
PANEL: 00.02
POWER: 02.01
FEEDER: 06.01
SORTER: 01.05
NIB: 03.00
PS/PCL: 30.06
MN-CONT: 45.01
BOOTROM: 26.44H
RUI: 42.01
LANG-EN: 45.01

Copying, printing and network scanning works like a charm.

Huge thanks to everybody who helped me!

David

[mrfixit51]

Glad to hear you are up and running! We love success stories ;-)

[Hejsan]

Glad to hear you are up and running! We love success stories ;-)

Thanks! :-) I love it too... It will be a pleasure for me to pass my experience to others, who need help with iR2200 / iR3300 machines, especially with Firmware issues.

[teckat]

Yessss!!! :-) It's working!... Now the "Versions" section looks like this:

DC-CON: 12.01
R-CON: 07.01
PANEL: 00.02
POWER: 02.01
FEEDER: 06.01
SORTER: 01.05
NIB: 03.00
PS/PCL: 30.06
MN-CONT: 45.01
BOOTROM: 26.44H
RUI: 42.01
LANG-EN: 45.01

Copying, printing and network scanning works like a charm.

Huge thanks to everybody who helped me!

David

Thanks & good luck ~~~~~~~~~~~~~~~~
Wash Hands.jpg

[Hejsan]

Thanks & good luck ~~~~~~~~~~~~~~~~

Thanks, teckat!

[linga555]

Firmware 2200_2800_3300 v45.01.7z

Firmware 2200_2800_3300 v45.01.7z

[teckat]

Firmware 2200_2800_3300 v45.01.7z

Firmware 2200_2800_3300 v45.01.7z

please do not post links to those Virus/Spam/ Key Logger websites

U HAVE BEEN WARNED/ HEED THE WARNING

[badboys]

...hehehe, it's that "Holy Shit Mediafire" link again.

[mrfixit51]

Like a bad penny, it keeps popping up

[teckat]

your PC /Laptop will be Crap after u download from that Hacker site