Canon lms error

[teckat]

Re: Canon lms error

ok

thx to teckat skynet

i got all answer

now sugeste me fromwhere i buy and which kit i buy ??

i not have more work for printing its very few job come here

so i need afordable

================================================== ===================
the PS kit will not function without UFRII/PCL kit
To use the features of the PS Printer Kit, it must be Activated > after the optional UFR II/ PCL Printer Kit has
been Activated.

UFRII/PCL will function by itself.==========UFRII print driver is close to 2.5 times faster than either the PS or PCL drivers (hence the name Ultra Fast Rendering).

take a chance on eBay/ combo complete license kit $ 425.74 US Dollar
seller quotes > new & unopened /

Ask Seller questions ( like where did u get all these combo kits from ) eBay now backs up all purchases )

I have never seen both the UFRII/PCL & PS Kit combined by Canon

Canon UFR II PCL PS Printer Kit S1 1355B002 AA | eBay

[om_khatti]

Re: Canon lms error

ok

thx to teckat skynet

i got all answer

now sugeste me fromwhere i buy and which kit i buy ??

i not have more work for printing its very few job come here

so i need afordable

[Tricky]

Re: Canon lms error

thx to all for suporte and guide me

i have only serial number for this machine

i think u all provide me good help but all is official way

and i not have this 16 digit licence number

any unoficial way for me for this machine ?

You cannot print ethernet or usb to your machine as it is disabled until you buy a license.

[teckat]

Re: Canon lms error

for aditional information

[ATTACH=CONFIG]28882[/ATTACH][ATTACH=CONFIG]28883[/ATTACH][ATTACH=CONFIG]28884[/ATTACH][ATTACH=CONFIG]28885[/ATTACH]


now sugest me from where i start

================================================== ===============================




Network Scanning = To use this function, the machine is required to be connected to a network, equipped with the Printer function, and
Network ScanGear to be installed on your computer.


Send Function = Universal Send Kit must be Activated.

Fax Function = Super G3 FAX Board or Super G3 Multi-Line FAX Board OPTION > Installed

UFR II/PCL Printer Function and TIFF/JPEG Direct Print Function = UFR II/PCL Printer Kit must be Activated

PS Printer Function and PDF/PS Direct Print Function = To use the features of the PS Printer Kit, it must be Activated > after the optional UFR II/ PCL Printer Kit has
been Activated.

Activated= means u need to spend some money to purchase the KITS that have the LMS License

[om_khatti]

Re: Canon lms error

for aditional information

DSC_0583.jpgDSC_0591.JPGDSC_0592.JPGDSC_0593.JPG


now sugest me from where i start

[om_khatti]

Re: Canon lms error

after more searching ur post i get some information

plz check

IR3025.jpgIR3025_2.jpg

i see bootP now i need ur sugetion for this

can i print with usb or lan ??

need sugetion for driver

[om_khatti]

Re: Canon lms error

thx to all for suporte and guide me

i have only serial number for this machine

i think u all provide me good help but all is official way

and i not have this 16 digit licence number

any unoficial way for me for this machine ?

[teckat]

Re: Canon lms error

i baught this machine refurbish condition i dont know where and what serial number for this kit

how iknow serial number for this kit ?

=========================================
u should read the brochures on your products before a purchase (see attachment)

they explain all options available



u order single KITS from a Canon Authorized Dealership / ITEM CODES LISTED BELOW
also believe there is a COMBO KIT available from Canon= UFR II / PCL / PS Printer Kit-S1 1355B002[AA] that has two LMS licenses



i would not purchase online . BUYER BEWARE OF CHEAP or USED or NEW Statements

a license can be transferred to a similar product < but it requires a transfer number from product & an original certificate LMS number.


UFRII/PCL Printer Kit-S1 (LMS Activated)
Optional controller enables networked printing with support for UFRII and PCL 5e/6 page description languages
Item Code: 1354B001AA

PS Printer Kit- S1(LMS Activated)_
*Supports emulated PostScript 3 page description language
* Requires the UFRII/PCL Printer Kit-S1
Item Code: 1636B001AA

[om_khatti]

Re: Canon lms error

Its a license key that activates the print function, its software, you cannot see it.

i baught this machine refurbish condition i dont know where and what serial number for this kit

how iknow serial number for this kit ?

[Tricky]

Re: Canon lms error

[ATTACH=CONFIG]28852[/ATTACH][ATTACH=CONFIG]28853[/ATTACH]


i think now clear for me i not have any kit instaled ?

on motherboard whare i chek ??

any image for this kit ?

Its a license key that activates the print function, its software, you cannot see it.

[om_khatti]

Re: Canon lms error

IR3025.jpgIR3025_2.jpg


i think now clear for me i not have any kit instaled ?

on motherboard whare i chek ??

any image for this kit ?

[teckat]

Re: Canon lms error

its very good answer

i got what i want

happy with ur answer

now i need 1st check machine that kit instaled or not

but realy happy with ur suporte

can i get location where this kit instaled in machine ??

any image ?

================================================== ============================

imageRUNNER 3025 / 3030 / 3035 / 3045 / 5055 / 5065 / 5075, imageRUNNER C2880 / C2880i / C3380 / C3380i / C4080 / C4080i / C4580 / C4580i / C5180 / C5180i / C5185 / C5185i, imagePRESS C1 / 7000

----Verifying that an LMS Based Printer Kit is Installed on an imageRUNNER / imagePRESS Device

------- The Printer Kits for many of the newer Canon devices are LMS based. The BootROM on these devices will always end with a C. There is no N, P, or H BootROM for these devices. How to tell what Printer Kit is installed on these machines_!!!!!!!!!!!!!!!!!!!!! ---------------- You can check for the LMS-based Printer Kit on the Canon device the same way as you would check for any other installed LMS-based option or kit. Perform the following steps: 1. Press the [Counter Check] button on the copier control panel. 2. Hit the [Device Configuration] button on the LCD screen. 3. Scroll down through all of the available pages on this Device Configuration screen. Look for either PS, PCL or UFRII. The methods listed here (ex. PS, PCL, or UFRII) are installed and are available for printing. For example, if you find UFRII and PCL, but do not find PS on this screen on an iR C5180, it means that the UFRII/PCL Printer Kit is installed, but the PS Printer Kit is not installed. The exact Canon Printer Kits available vary by device model. See your specific device's documentation for more information.

Print Options for the imageRUNNER 3045/3035/3030/3025===============;-/>


These are the available print options and item codes:

UFRII/PCL Printer Kit-S1(LMS Activated)
Optional controller enables networked printing with support for UFRII and PCL 5e/6 page description languages
Item Code: 1354B001AA

PS Printer Kit- S1(LMS Activated)_
*Supports emulated PostScript 3 page description language
* Requires the UFRII/PCL Printer Kit-S1
Item Code: 1636B001AA

[om_khatti]

Re: Canon lms error

its very good answer

i got what i want

happy with ur answer

now i need 1st check machine that kit instaled or not

but realy happy with ur suporte

can i get location where this kit instaled in machine ??

any image ?

[teckat]

Re: Canon lms error

same problem for me

i not able to print

i am not technician

my last problem with fuser film solved here so i come back here

i need full guide for this process how activate printing through usb or networking

what i need check before contact cannon

step by step

i ask my technician but unfortunatly he say this problem is out of his mind

if possiblem provide me whole process

IR3025

-------------------------------------------------------------------------------

PRINT WITH CONFIDENCE
Activate the optional UFR II/PCL Printer Kit-S1UFR II Print Driver MENU
UFR.jpg
================================================== ========
Users who prefer PostScript workflows can add the optional PS Printer Kit-S1.

================================================== ========

Registering a LAN (License Access Number) on LMS (License Management System)


The License Management System is a website used to register LANs (License Access Numbers) for Universal Send Kits and other optional kits for the Canon imageRUNNER devices.

To Register a LAN:

1. Using a Web Browser (ex. Internet Explorer) on your PC, go to the LMS website at http://www.canon.com/lms/ir.

2. Enter in the LAN provided in the optional kit (ex. Universal Send Kit).

3. Enter the serial number for the imageRUNNER device (the machine that the optional kit will be installed on). BE SURE TO ENTER THE CORRECT SERIAL NUMBER.

4. Copy down the License Key number for the installation.

For more information, please see the attached file lms.pdf.

To Install the Optional Kit on the imageRUNNER Device:

1. On the copier, hit Additional Functions > System Settings > scroll down > License Registration.

2. Enter the License Key number you copied down when registering the LAN on the LMS website.

3. Hit the Start button on the License Registration screen.

4. Reboot the copier.

* Note that some optional kits may require certain prerequisite items to be installed before performing the above steps.

[om_khatti]

Re: Canon lms error

same problem for me

i not able to print

i am not technician

my last problem with fuser film solved here so i come back here

i need full guide for this process how activate printing through usb or networking

what i need check before contact cannon

step by step

i ask my technician but unfortunatly he say this problem is out of his mind

if possiblem provide me whole process

IR3025