IRC2380 fuser film

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Kings
    Steve@Kings

    50+ Posts
    • Nov 2009
    • 79
    #1

    IRC2380 fuser film

    Hi all,
    Anybody know of a compatible fuser film or an HP equivilent for the Canon IRC2380.
    we have a few of these out on the feild and every time the film goes down we have to
    replace the whole heating element which is very costly.

    Any help welcome
    Thanks
    Tags: canon, compatible, down, film, fuser, fuser film, help, hi all, irc, irc2380, time
    • SCREWTAPE
      East Coast Imaging

      Site Contributor
      2,500+ Posts
      • Jan 2009
      • 3396
      #2
      It is what it is. If you buy generic parts you will end up spending more money.

        Comment

        • Kings
          Steve@Kings

          50+ Posts
          • Nov 2009
          • 79
          #3
          We have been using generic films for years ( saving us many pounds ) and the same has to be said for drum units and upper fuser rollers....Just a problem getting one for the irc2380

            Comment

            • charm5496
              Service Manager

              Site Contributor
              1,000+ Posts
              • Apr 2008
              • 2387
              #4
              There are many companies out there that sell "knock off" parts and the fixing film is one of them. We have tried them to save a buck here or there and when you do a cost analysis the Canon films always go longer and have a lower CPC than the knock off part does. This goes for the drums, fuser rollers, cassette tires and fixing films.

              Bottom line....you get what you pay for.
              Accidents don't just happen. They must be carelessly planned.

                Comment

                Previous template Next
                Working...