booklet finisher c1 error

[SCREWTAPE]

5 STARS

Nice going.

[mrfixit51]

Loose connector.

Thanks for the update,, glad you have it resolved!!!

[zoraldinho]

Bad, as in loose connector,,, or bad, as in had to replace the controller board?

Loose connector.

[mrfixit51]

Bad, as in loose connector,,, or bad, as in had to replace the controller board?

[zoraldinho]

E531

Staple motor(M41)/Staple home position detect switch

8001 The stapler does not leave the staple home position when
the staple motor has been driven for 0.4 sec.

8002 The stapler does not return to the staple home position
when the staple motor has been driven for 0.4 sec.

Something is keeping the stapler from leaving or getting back home,,, investigate.

Thanks for post.I change stapler and nothing happen.Problem was bad connector.

dsc00131.JPG

[mrfixit51]

E531

Staple motor(M41)/Staple home position detect switch

8001 The stapler does not leave the staple home position when
the staple motor has been driven for 0.4 sec.

8002 The stapler does not return to the staple home position
when the staple motor has been driven for 0.4 sec.

Something is keeping the stapler from leaving or getting back home,,, investigate.

[zoraldinho]

Hi

i have an issue on booklet finisher c1 error 531-0001 advance series.
Finisher is brand new.I check cables and connectors and use some grease
but nothing happen.Any ideas??