IR 3225 display panel part number

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • bobthecopierman
    Technician

    50+ Posts
    • Mar 2010
    • 53
    #1

    [Misc] IR 3225 display panel part number

    Have an IR 3225 display that is barely lit up, its almost dark but you can feintly see the display. Tried adjusting with contrast but doesnt change. Tried reseating memory and no change. Need the p/n for the display panel. Dont have access to a 3225 parts manual.
    Also was thinking about ordering an all night ps and need the number for it as well.
    I have parts manuals for many other IRs and will be glad to reciprocate if you need anything. Thanks for the help.
    Tags: 322, access, change, display, failure, hue, hytec, lef, manual, manuals, memory, panel, part number, parts, power supply, symptom
    • teckat
      Field Supervisor

      Site Contributor
      10,000+ Posts
      • Jan 2010
      • 16083
      #2
      Originally posted by bobthecopierman
      Have an IR 3225 display that is barely lit up, its almost dark but you can feintly see the display. Tried adjusting with contrast but doesnt change. Tried reseating memory and no change. Need the p/n for the display panel. Dont have access to a 3225 parts manual.
      Also was thinking about ordering an all night ps and need the number for it as well.
      I have parts manuals for many other IRs and will be glad to reciprocate if you need anything. Thanks for the help.

      *****Control Panel Assembly=has Inverter & LCD Panel included

      FM3-7261-000
      CONTROL PANEL ASSEMBLY EXCEPT =JP,EUR

      FM3-7262-000
      CONTROL PANEL ASSEMBLY= EUR

      FL3-0489-000
      LCD CONTROL PANEL UNIT

      FM4-6690-010
      LCD Inverter PCB

      I would first try replacing LCD Inverter PCB revised to #FM4-6690-010

      The new style LCD Inverter PCB (Part Number FM4-6690-010) now has a jumper, JP4, on it. Also, there may be one of two different style LCD's in the machine, each with a different style connector to the Inverter PCB. There are two positions for jumper JP4 depending on which LCD you have.

      If the LCD Display's connector plugs into J2 on the LCD Inverter PCB, the jumper for JP4 should be positioned all the way to the left for the LCD Display to work properly. Please refer to the picture below:
      Inverter.jpg
      If the LCD Display's connector plugs into J3 on the LCD Inverter PCB, the jumper for JP4 should be positioned all the way to the right for the LCD Display to work properly. Please refer to the picture below.
      Inverter2.jpg

      READ BELOW




      mageRUNNER 3225 / 3230 / 3235 / 3245 LCD Control Panel Assembly hue failure was restored by disconnecting and then connecting the connector of the Control Panel Assembly.

      LCD Control Panel Assembly hue failure was restored by disconnecting and then connecting the connector of the Control Panel Assembly. In the field, the LCD Control Panel Assembly took on a reddish tinge, and looked distorted.

      The symptom was resolved by removing the Control Panel Assembly and disconnecting and then connecting the connector on the rear side of the Control Panel Assembly. The images below were taken from the service manual to help with the location of the connector. They are from pages 10-25 and 10-26 of the respective machine's service manual. A red arrow has been placed to point out the connector that is to be connected again.







      **Knowledge is time consuming, exhausting and costly for a trained Tech.**

        Comment

        • bobthecopierman
          Technician

          50+ Posts
          • Mar 2010
          • 53
          #3
          great info thanks for the help!

            Comment

            • teckat
              Field Supervisor

              Site Contributor
              10,000+ Posts
              • Jan 2010
              • 16083
              #4
              Thumbs up.jpg

              let us know what happens>>>>>>>>>>>>
              **Knowledge is time consuming, exhausting and costly for a trained Tech.**

                Comment

                • bobthecopierman
                  Technician

                  50+ Posts
                  • Mar 2010
                  • 53
                  #5
                  Went back out and tried the connectors. No luck. Replaced the LCD Inverter PCB and that took care of it.
                  Thanks again.

                    Comment

                    • teckat
                      Field Supervisor

                      Site Contributor
                      10,000+ Posts
                      • Jan 2010
                      • 16083
                      #6
                      Originally posted by bobthecopierman
                      Went back out and tried the connectors. No luck. Replaced the LCD Inverter PCB and that took care of it.
                      Thanks again.

                      HatTip_2.jpg
                      **Knowledge is time consuming, exhausting and costly for a trained Tech.**

                        Comment

                        • mrfixit51
                          Lead Service Technician

                          1,000+ Posts
                          • Oct 2008
                          • 1975
                          #7
                          Good site to find part numbers for lots of electrical parts on the copiers...

                          Search Parts Catalog - Nation-Wide Repair Service, Inc. (NWRS)

                          This is not advertising, but just a mention of a site I use to find board, power supply, control panel, and loads of other electronic/electrical part numbers for the copiers. My company makes pretty good use of this company. They also have an 800 number for technical assistance...
                          "Once a King, always a King, but once a Knight is enough!"

                            Comment

                            • blazebusiness
                              SanDiegoCopierRepair.com

                              Site Contributor
                              1,000+ Posts
                              • Apr 2010
                              • 1250
                              #8
                              Thanks for the link. I guess they do the same thing as Hytec.

                              Circuit Board Repair by Hytec Dealer Services, Inc.
                              sigpicAnything can be made to work if you fiddle with it long enough- San Diego Copier Repair.com

                                Comment

                                • mrfixit51
                                  Lead Service Technician

                                  1,000+ Posts
                                  • Oct 2008
                                  • 1975
                                  #9
                                  Yes, they are competing companies,,, I believe Hytec also provides free tech support as well!
                                  "Once a King, always a King, but once a Knight is enough!"

                                    Comment

                                    • teckat
                                      Field Supervisor

                                      Site Contributor
                                      10,000+ Posts
                                      • Jan 2010
                                      • 16083
                                      #10
                                      Originally posted by mrfixit51
                                      Yes, they are competing companies,,, I believe Hytec also provides free tech support as well!

                                      Hytec will help walk through Pcb's board check support for free
                                      **Knowledge is time consuming, exhausting and costly for a trained Tech.**

                                        Comment

                                        Previous template Next
                                        Working...