Replaced drums on a IRC 4080 today, but during preparation of the Cyan, the plastic semi-transparent sheet that should be pulled out in front of the drum teared. Now a peace is still stuck inside.
Opening the toner supply looked like the starter was dropped inside. So i took a change and installed it. during gradation DENS values looks fine and TP10 and 4 look fine. So i left it this way.
Should i worry about it giving trouble in future or should it be fine.
Opening the toner supply looked like the starter was dropped inside. So i took a change and installed it. during gradation DENS values looks fine and TP10 and 4 look fine. So i left it this way.
Should i worry about it giving trouble in future or should it be fine.
Comment