Warped printing for iR3300

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Peter Sim
    Trusted Tech

    250+ Posts
    • Sep 2008
    • 445

    #1

    Warped printing for iR3300

    Hai all ,
    Need help.
    What can causes this printing.Here is the attachment :Warped printing.pdf
    Is intermittern printing,from copy to pc print.

    Thank in advance.
  • teckat
    Field Supervisor

    Site Contributor
    10,000+ Posts
    • Jan 2010
    • 16083

    #2
    Originally posted by Peter Sim
    Hai all ,
    Need help.
    What can causes this printing.Here is the attachment :[ATTACH]6632[/ATTACH]
    Is intermittern printing,from copy to pc print.

    Thank in advance.

    Could be a LASER ISSUE

    +++ Check your Scanner Assembly
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

    Comment

    • Peter Sim
      Trusted Tech

      250+ Posts
      • Sep 2008
      • 445

      #3
      Thanks ,i will check the scanner and laser unit
      Originally posted by teckat
      Could be a LASER ISSUE

      +++ Check your Scanner Assembly

      Comment

      • blackcat4866
        Master Of The Obvious

        Site Contributor
        10,000+ Posts
        • Jul 2007
        • 23009

        #4
        I've got to agreed. Just laser unit. =^..^=
        If you'd like a serious answer to your request:
        1) demonstrate that you've read the manual
        2) demonstrate that you made some attempt to fix it.
        3) if you're going to ask about jams include the jam code.
        4) if you're going to ask about an error code include the error code.
        5) You are the person onsite. Only you can make observations.

        blackcat: Master Of The Obvious =^..^=

        Comment

        • Peter Sim
          Trusted Tech

          250+ Posts
          • Sep 2008
          • 445

          #5
          Thank you teckat and blackcat for the reply.
          After i replace the laser unit, the printing problem was ok. Will continue monitoring
          Thanks.

          Comment

          • teckat
            Field Supervisor

            Site Contributor
            10,000+ Posts
            • Jan 2010
            • 16083

            #6
            Originally posted by Peter Sim
            Thank you teckat and blackcat for the reply.
            After i replace the laser unit, the printing problem was ok. Will continue monitoring
            Thanks.

            KOOL~~~~~~~~~~~~
            **Knowledge is time consuming, exhausting and costly for a trained Tech.**

            Comment

            Working...