[Misc] Position of multifeeder lifter motor (M1)

[COCODIAZ]

Hi all,
i have removed the multifeeder tray assembly., for clean a paper residual, and when try to mounting the multifeeder, dont match its hook against the hole in the stay.
How can match its hook if the Multifeeder lifter motor hook its turned (M1)

thanks in Advance

[teckat]

Hi all,
i have removed the multifeeder tray assembly., for clean a paper residual, and when try to mounting the multifeeder, dont match its hook against the hole in the stay.
How can match its hook if the Multifeeder lifter motor hook its turned (M1)

thanks in Advance

What model of machine are u talking about ?????????????
mind-reader11.jpg

[COCODIAZ]

CANON CLC 5100

Sorry, the model is a CANON CLC 5100

[COCODIAZ]

the solution was power on the machine and reassembly again, thanks

[teckat]

the solution was power on the machine and reassembly again, thanks

U MEAN RE-ASSEMBLY then Power On ??

[COCODIAZ]

exactly. first power on , then power off, and finally RE-ASSEMBLY