Canon IR5075 ADF Problem - Jam Code 0094

[teckat]

Re: Canon IR5075 ADF Problem - Jam Code 0094

hi;
i have ir7105 at customer site, soddenly stopped printing, but i can ping it from any pc on network
also i can scan to any pc on network.
tried to reinstall the driver but no good
i used UFR II and the pcl v.15 and v87 and the driver can not detect the printer
please help
thanks raouf

Perform the following steps:

1. Press the [Counter Check] button on the copier control panel.

2. Press the [Device Configuration] button on the LCD screen.

3. Scroll down through all of the available pages on this Device Configuration screen. Look for either PS, PCL or UFRII. The methods listed here (ex. PS, PCL, or UFRII) are installed and are available for printing.

[nardinard]

Re: Canon IR5075 ADF Problem - Jam Code 0094

igot jam 0094 to

copier>I0>Feeder
P0003 - 0(0/1)000000

i have P0003 bit 1 with 0 and 1 blink
what is mean.
pls help.

[teckat]

Re: Canon IR5075 ADF Problem - Jam Code 0094

igot jam 0094 to

copier>I0>Feeder
P0003 - 0(0/1)000000

i have P0003 bit 1 with 0 and 1 blink
what is mean.
pls help.

Sensor bit check in I/O mode Blinking on n' off can mean a few things depending on type and location of sensor.

Could be loose flag action, short in connection, dirty led face, improper voltages.

What is model ?

[nardinard]

Re: Canon IR5075 ADF Problem - Jam Code 0094

Sensor bit check in I/O mode Blinking on n' off can mean a few things depending on type and location of sensor.

Could be loose flag action, short in connection, dirty led face, improper voltages.

What is model ?

canon IR5075.
thx for replay

[teckat]

Re: Canon IR5075 ADF Problem - Jam Code 0094

canon IR5075.
thx for replay

---

what Dadf do u have ???? copier>I0>Feeder bit 1 P0003 - 0(0/1)000000 5075 Printer Service Manual --FEEDER P003 Bit 1 = is the feed motor current setting CUT ???? S1 Manual I/O >FEEDER SL1 P003-1 1:ON SL-CHK>1 DADF-M1 DADF-S1

Title : 0094 Jam Code

The document feeder is generating a 0094 jam code that will not clear until the machine is power cycled. A 0094 jam code can be generated by any paper path sensor in the document feeder. Any of the path sensors (PI1, PI11, PI12, PCB2, PCB3, PCB4) can cause a 0094 jam code. Solution : Returning the prism for PI7(DADF M1) / PCB2(DADF S1) to its proper position, resolved this issue. See photo below for location of sensor prism.

================================================== ==================================================

EXAMPLE---------------------a foreign object was found interfering with the flag actuator operation of PI11.
The picture below shows the location of PI11.

[nardinard]

Re: Canon IR5075 ADF Problem - Jam Code 0094

---

what Dadf do u have ???? copier>I0>Feeder bit 1 P0003 - 0(0/1)000000 5075 Printer Service Manual --FEEDER P003 Bit 1 = is the feed motor current setting CUT ???? S1 Manual I/O >FEEDER SL1 P003-1 1:ON SL-CHK>1 DADF-M1 DADF-S1

Title : 0094 Jam Code

The document feeder is generating a 0094 jam code that will not clear until the machine is power cycled. A 0094 jam code can be generated by any paper path sensor in the document feeder. Any of the path sensors (PI1, PI11, PI12, PCB2, PCB3, PCB4) can cause a 0094 jam code. Solution : Returning the prism for PI7(DADF M1) / PCB2(DADF S1) to its proper position, resolved this issue. See photo below for location of sensor prism.

================================================== ==================================================

EXAMPLE---------------------a foreign object was found interfering with the flag actuator operation of PI11.
The picture below shows the location of PI11.

i clean every sensor but jam still occur
I got this after replace pickup roller

[teckat]

Re: Canon IR5075 ADF Problem - Jam Code 0094

i clean every sensor but jam still occur
I got this after replace pickup roller

---

where are u getting this I/O Bit code from ????

what do you have

DADF-M1 or a

DADF-S1

[nardinard]

Re: Canon IR5075 ADF Problem - Jam Code 0094

---

where are u getting this I/O Bit code from ????

what do you have

DADF-M1 or a

DADF-S1

S1 mybe, im not sure

[teckat]

Re: Canon IR5075 ADF Problem - Jam Code 0094

DADF S1 SENSORS.jpgDADF S1_Motor, Clutch, Solenoid, PCB, etc..jpg

================================================== ========================================

DADF M1 SENSORS.jpgDADF M1_Motors, Clutches, Solenoids, PCBs, and Others.jpg
================================================== =================================

[nardinard]

Re: Canon IR5075 ADF Problem - Jam Code 0094

[ATTACH=CONFIG]38601[/ATTACH][ATTACH=CONFIG]38602[/ATTACH]

================================================== ========================================

[ATTACH=CONFIG]38603[/ATTACH][ATTACH=CONFIG]38604[/ATTACH]
================================================== =================================

Part Check
M1-M6 ok
CL - dont know, just sound like 'tik'
Fan ok
SL 1, 2 ok
All sen clear
Still jam occure

[amitlama_78]

Re: Canon IR adv 81055 ADF Problem - Jam Code 0095

Hi
I'm also having the same problem. My adf tray does not lift nor does the led light turns on when i insert the paper.
I had also already posted the same thread earlier but could not figured out the problem. I have changed all the sensors, pcb boards and the dadf drive board but no luck.
I'm guessing could it be the firmware? Mine nic card is also not working so cannot update my firmware.
Im out of ideas please help

regards

Amit