[Jamming] iRC 3200 - Jam Code 0A07

[MFPTech]

iRC 3200 - Jam Code 0A07

Replaced the Paper exit sensor and its actuator in the fuser unit but it still shows paper jam in the fuser. Any ideas?

Thanks

[teckat]

iRC 3200 - Jam Code 0A07

Replaced the Paper exit sensor and its actuator in the fuser unit but it still shows paper jam in the fuser. Any ideas?

Thanks

Check your Fuse Pcb
also check fix unit connectors below>
fu.JPG
when u push in this unit that block connector must sit firm to frame/ inspect block for cracks

[charm5496]

I have seen pinched wires in the vertical path cause issues with jams in the fuser