if the machine has any license keys installed in it you will have to transfer them out or deactivate them. The only other thing you might run into is a firmware mismatch between the H1 and the machine. If one is higher and the other has not been updated recently then they are not going to talk the way they should.
You can verify what is installed on the machine by going to counter check and device configuration. You will see PS and PCL listed if it has those kits installed.
Conecting Imagepass H1 with iRC5185
Collapse
X
-
READ THIS 5185 INFO~~~~~~~~~~~~
imagePass H1 Info TP08 144.pdf
imagePass H1 Install.pdf
iR5185 Service GU .pdfLeave a comment:
-
Leave a comment: