Platen Glass Dirty IR8500

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • dqtek
    Technician
    • Sep 2010
    • 16
    #1

    Platen Glass Dirty IR8500

    Copier says Platen Glass is Dirty. Cleaned all optics still says it after scanning
    Tags: 500, cleaned, copier, dirty, glass, ir8500, plate, sca, scan, scanning
    • charm5496
      Service Manager

      Site Contributor
      1,000+ Posts
      • Apr 2008
      • 2387
      #2
      COPIER>FUNCTION>CCD>CCD-ADJ

      This usually takes care of that message on this model
      Accidents don't just happen. They must be carelessly planned.

        Comment

        • y_us1982
          #3
          Originally posted by charm5496
          COPIER>FUNCTION>CCD>CCD-ADJ

          This usually takes care of that message on this model
          did u mean increase or decrease?

            Comment

            • randall
              Technician

              50+ Posts
              • Sep 2009
              • 73
              #4
              I had a similar problem nothing worked so I changed the following, do the first one test if didnt work do the second

              COPIER>OPTION>USER>SPECK-DP to 0 to disable the warning for the result of dust detection for stream reading.
              COPIER>OPTION>BODY>DF-BLINE TO 1 to turn off dust detection mechanism for stream reading
              Some people may say I have a short temper, but I prefer to call it
              "A swift and assertive reaction to bullshit"

                Comment

                Previous template Next
                Working...