ir8070 e100

[jiongpao]

e100 on ir8070 BD PCB changed and error clear no hope. Do we really need to change laser unit? Or should i try to disassemble it and do some cleaning? The code come out once a while.

[jiongpao]

Re: ir8070 e100

i found out e100 can be solve by removing the laser unit and clean all around.

[blazebusiness]

Re: ir8070 e100

e100 on ir8070 BD PCB changed and error clear no hope. Do we really need to change laser unit? Or should i try to disassemble it and do some cleaning? The code come out once a while.

Common problem on this model. You'll probably need to replace the laser if the problem isn't related to the door interlock switch or door mount assy causing problem with the shutter. Obviously....check the door 1st before ordering a laser.

[V-P]

Re: ir8070 e100

Usually when the laser is GONE it makes some noise.
If you hear that noise than it is a good indicator to buy a new one.