ipass c1-e747

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • roho
    Senior Tech

    500+ Posts
    • Mar 2009
    • 844
    #1

    [Error Code] ipass c1-e747

    error code 747- sub code 8000. Not in my manual. Has anybody had this code up before?
    Was hoping to get some info before I go there mon morn, thanks!
    Tags: 747, 800, 8000, before, code, error, error code, imagepass, info, ipass, manual
    • zoraldinho
      teacher-guide-expert-guru

      Site Contributor
      5,000+ Posts
      • Mar 2008
      • 5015
      #2
      Check connectors on main controller, turn of and on machine and continue with making money.
      If it ain't broke, don't fix it
      A picture is worth a thousand words

        Comment

        • teckat
          Field Supervisor

          Site Contributor
          10,000+ Posts
          • Jan 2010
          • 16083
          #3
          Originally posted by roho
          error code 747- sub code 8000. Not in my manual. Has anybody had this code up before?
          Was hoping to get some info before I go there mon morn, thanks!

          u mean imagePress C1
          or the imagePass C1 Fiery ???


          always post the entire code> as in Sub code> E747-XXXX ??

          1. Remove SDRAM from the Main Controller PCB.
          2. Wipe the terminal of SDRAM with lint-free paper impregnated with alcohol, and then re-fit the SDRAM.

          There is an error in the ASIC for image processing or in the ASIC for memory
          control/communication control.
          There is an error in IC1015 (ASIC for image processing) or in IC1012 (for memory control/ communication control) on the main controller PCB (e.g., image data transfer error)
          **Knowledge is time consuming, exhausting and costly for a trained Tech.**

            Comment

            Previous template Next
            Working...