Canon IRC3200

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • msmy
    Trusted Tech

    100+ Posts
    • May 2010
    • 123
    #1

    Canon IRC3200

    Hi guys,
    I have a problem with maybe machine margin adjustment. I can scan/copy well when i placed papers on the mirror of the machine. But, when I using ADF, then I scan, I can't get full page of the documents; only in the middle. It's mean that, I only can scan/copy of the middle of the documents. help me how to adjust the ADF margin.
    Tags: adf, canon, copy, documents, full, irc, irc3200, scan
    • Tricky
      Field Supervisor

      Site Contributor
      2,500+ Posts
      • Apr 2009
      • 2621
      #2
      You can try the doc stop adjustment in service mode that's, feeder / adjust / doc stop.

        Comment

        • teckat
          Field Supervisor

          Site Contributor
          10,000+ Posts
          • Jan 2010
          • 16083
          #3
          SERVICE MODE

          FEEDER>ADJUST>DOCST
          • Increasing the value makes the leading edge blank smaller.
          Adjustment –100 to 100 (0.337 mm units)
          Operation Dip-switch functions
          The dip-switch (DSW1) functions of the ADF controller PCB are as follows.
          Normal settings Normal operation status is when all bits are OFF.
          Document tray adjustmentset all bits
          back to OFF
          **Knowledge is time consuming, exhausting and costly for a trained Tech.**

            Comment

            Previous template Next
            Working...