Problem Resolved - Thanks
Thanks to all I was finally able to isolate the problem. After much parts changing and beer drinking, a nights sleep and another go at er, It seems to have come down to the exit mechanism to the finisher. I noticed a sheet attempting to go back to the duplex unit that was already printed on the second side. Had already changed the duplex unit, three sensors, electric motor the drives the delivery mode and finally the entire exit assembly.
Seems to work well now.
Thanks again.
And thanks to you Blackcat, and yes Sacredcircle.ca Not much of a website, just a map with the major rivers featuring a profile looking east surrounded by the last of the thriving North American Indian Culture. Some of these villages are still speaking their own native language. One Nisga'a Village just got a road into their town a few years ago. Still very much the way they were. Check this out
Thanks to all I was finally able to isolate the problem. After much parts changing and beer drinking, a nights sleep and another go at er, It seems to have come down to the exit mechanism to the finisher. I noticed a sheet attempting to go back to the duplex unit that was already printed on the second side. Had already changed the duplex unit, three sensors, electric motor the drives the delivery mode and finally the entire exit assembly.
Seems to work well now.
Thanks again.
And thanks to you Blackcat, and yes Sacredcircle.ca Not much of a website, just a map with the major rivers featuring a profile looking east surrounded by the last of the thriving North American Indian Culture. Some of these villages are still speaking their own native language. One Nisga'a Village just got a road into their town a few years ago. Still very much the way they were. Check this out
Comment