[Dead] reset memory

[Gar]

i'm trying to reset memory on canon ir3200. first time working on this machine,
colors don't line up new drums, cleaning blade, transfer belt in good shape and rollers
cleaned,

thanks
gar

[teckat]

The main reason the colours dont line up is if the inside of the ITB is dirty, remove the ITB assy, remove & clean the inside of the belt & the rollers.
Then in serice mode perform COPIER>FUNTION>CLEAR>DC CON press OK.
Turn then m/c off+on

Please add this to your advise on clearing info
U need to print out a P PRINT SHEET before any DCON/RCON CLEAR -
numbers need to be put back in

[teckat]

i'm trying to reset memory on canon ir3200. First time working on this machine,
colors don't line up new drums, cleaning blade, transfer belt in good shape and rollers
cleaned,

thanks
gar

read this pdf
[ATTACH]8766[/ATTACH]


****U need to print out a P PRINT SHEET before any DCON/RCON CLEAR -
numbers need to be put back in !!!!!!!!!!!

[CT Copier Repair]

another end user trying this stuff
i love that they screw stuff up
cause i get to go in and charge then for their ignorance

[zoraldinho]

i'm trying to reset memory on canon ir3200. first time working on this machine,
colors don't line up new drums, cleaning blade, transfer belt in good shape and rollers
cleaned,

thanks
gar

This post maybe can help.

irc3200-019.pdf

[teckat]

This post maybe can help.

[ATTACH]8771[/ATTACH]

Magneto.jpg

[zoraldinho]

[ATTACH=CONFIG]8772[/ATTACH]

Sorry dude it's late and i'm drunk.I didn't see.