2022 DF Adjustment

[Brian8506]

I need to get a manual. Until I do, does anyone know the adjustments for side to side registration thru DF. On glass is fine. Lead to trail is fine thru df

[teckat]

I need to get a manual. Until I do, does anyone know the adjustments for side to side registration thru DF. On glass is fine. Lead to trail is fine thru df

Brian, check your PM>

for > DADF P1 ???
Side Registration Adjustment
1) Place the test chart on the DADF and take a copy of it.
2) Compare the side registration on the test chart with that on the copy. Perform
adjustment if required.
If the image is shifted forward, increase the value.
If the image is shifted rearward, decrease the value.
Adjustment step: 0.1 mm
3) Enter the service mode.
Press the User Mode key " ", 2 key, 8 key, User Mode key " " on the
operation panel of the host machine.
4) Using the arrow keys on the operation panel, display "#SCAN".
5) Press the OK key.
6) Using the arrow keys on the operation panel, display "#SCAN NUMERIC".
7) Press the OK key.
8) Using arrow keys, select 41.
9) Using numeric keys, change the value to determine the optimum value.
Press the OK key. (Default: 35)

Leading Edge Registration Adjustment
1) Place the test chart on the DADF and take a copy of it.
2) Compare the leading edge registration on the test chart with that on the
copy. Perform adjustment if required.
If the image is shifted leftward, decrease the value.
If the image is shifted rightward, increase the value.
Adjustment step: 0.1 mm
3) Enter the service mode.
Press the User Mode key " ", 2 key, 8 key, User Mode key " " on the
operation panel of the host machine.
4) Using the arrow keys on the operation panel, display "#SCAN".
5) Press the OK key.
6) Using the arrow keys on the operation panel, display "#SCAN NUMERIC".
7) Press the OK key.
8) Using arrow keys, select 42.
9) Using numeric keys, change the value to determine the optimum value.
Press the OK key. (Default: 220)
After completion of this adjustment, check for squareness. If it is wrong,
go back to the squareness adjustment procedure.

[Brian8506]

Thanks again!

[teckat]

HatTip_2.jpg

[Brian8506]

Klondike Cat always gets his mouse. Adjustment on DADF P-1 is same as P-2.

[teckat]

Klondike Cat always gets his mouse. Adjustment on DADF P-1 is same as P-2.

Zip-it.JPG