[Misc] canon ir 6000

[Saji]

i got a prob. with canon ir 6000, when i switch on, it shows the message, close the main door, but once i open the door and close, machoine is ok..i replaced the door switch, checked wiring, change powersupply.but same problom persists.plz help, thnaks in advance.

[teckat]

i got a prob. with canon ir 6000, when i switch on, it shows the message, close the main door, but once i open the door and close, machoine is ok..i replaced the door switch, checked wiring, change powersupply.but same problom persists.plz help, thnaks in advance.

check door magnet

[anothertech]

Problem :
Close front door indication that changes to insert unit 2 just after you turn the machine on. If you open front door and close it machine comes to ready. When duplexing you may or may not see side to side shift on second side only with no Error Code.

Solution :
There is no E051 indication for the IR5000 series. Check connectors J229, J230, replace Duplex Horizontal Registration Motor M16. May also need Duplex Driver PCB and Duplex Horizontal Registration Sensor PS31.