ir 1600 receptacle plein

[walidcharifi]

hi
i have ir 1600 display receptacle plein
help me plz

[teckat]

hi
i have ir 1600 display receptacle plein
help me plz

receptacle full=

Waste toner is collected by the cleaning blade inside the drum, and is kept in the waste
toner assembly.
The waste toner inside the waste toner assembly is constantly stirred by the stirring rod
driven by the main motor. The tip of the stirring rod is equipped with a torque limiter unit,
which goes ON when the waste toner assembly becomes full and the rod can no longer
stir the waste toner; as a result, the sensor lever of the waste toner case full sensor
(PS120) will be pushed, causing the machine to know that the waste toner case has become
full

Sequence of Operation
The machine monitors the waste toner assembly in 2 steps.
If the waste toner case full detection signal (CFULL*) is ‘0’ for about 1.75 sec or more
during initial rotation and during printing, the machine will identify the condition as indicating
that the waste toner case is full, and communicate the fact to the image processor
PCB, which in turn will indicate the messages ‘WASTE TONER FULL’ and ‘PREPARE A
NEW DRUM’ in the control panel.
Thereafter, the machine is designed to stop when it has printed 200 page (cumulative).
It is reset when initial rotation takes place occurring when the power is turned off and
then on or the front cover is opened and then closed.

The water toner case is capable of storing about 210 g of toner (about 23,000 pages of A4, at 3% print ratio).

[walidcharifi]

thank you
I checked the drum kit but still the same problem it is empty

[Herrmann]

replace drum cartridge, after 20k prints its worn out anyway