[Misc] TONER IR5000

[bakaoni666]

I've a problem with iR5000. It run out of toner so quick. How can i fix it?

[zoraldinho]

I've a problem with iR5000. It run out of toner so quick. How can i fix it?

We can not measure toner life with time.

-How many copies machine make with toner bottle?
-What do you printing? (%%%%%%)
-Is it print too dark?
-Do you have hooper issue(toner leaking)?

[bakaoni666]

normal use

it's about 7500 sheets for 1kg. usually 20000sheets/kg ( sometimes more ).
only text copy.

2 years ago i found this trouble on NP 6050.
i forgot to plug the erase lamp.
1kg for 5000 sheets.

[charm5496]

well what work has been done to the machine lately? You may want to revisit that work and make sure it was done correctly
Are you using genuine Canon toner? Off brand toner is not reliable and could be causing an issue.

The 30,000 sheet estimate for this machine is based on 6% coverage and if you have a lot of bold text or the page is full of text then your coverage will be much higher than the 6%.

If you are not having any CQ issues you may want to have a tech come out to make sure that the machine is running within spec. Also are these copies or prints? Even though you are outputting just text when copying or printing in text mode your image will come out much darker than setting it on publication on the print side or text/photo on the copy side.

[charm5496]

6%_sample[1].pdf
Here is a sample of 6% coverage:

[gensys]

I've a problem with iR5000. It run out of toner so quick. How can i fix it?

If the iR in a good condition, prints of 1 kg of an order from 28000 to 32000-35000 copy at (5%)
Cleaning (cheking) Prim. Toner Blocking Sheet
Cleaning (cheking) Dev. Toner Blocking Sheet
Cleaning (cheking) Cleaner Scraper
Remove the Push-on roll chek- replace
Cleaning (cheking) Drum, mirror, Prim. corrona..................

[D_L_P]

Just another suggestion.

Copier-> Option-> Body-> COTDPC-D -> Set to 1

[bakaoni666]

for factory use... there is no other explanation about that option.
will you explain more clearly Mr. D_L_P



Thanks a lot.

[bakaoni666]

well what work has been done to the machine lately? You may want to revisit that work and make sure it was done correctly
Are you using genuine Canon toner? Off brand toner is not reliable and could be causing an issue.

The 30,000 sheet estimate for this machine is based on 6% coverage and if you have a lot of bold text or the page is full of text then your coverage will be much higher than the 6%.

If you are not having any CQ issues you may want to have a tech come out to make sure that the machine is running within spec. Also are these copies or prints? Even though you are outputting just text when copying or printing in text mode your image will come out much darker than setting it on publication on the print side or text/photo on the copy side.

Over a month the machine work normally. a week ago i cleaned the pretrans. in 2 days it was full again. i cleaned it again. 2 days later the same things happened. I try to checked the cleaning unit in drum unit. it full with mixed toner (good toner-black & waste toner-grey).
Sorry for may bad english...

[charm5496]

and your image quality is fine? Just want to make sure of that and that no other service mode settings were adjsuted beween when the machine was running "normal" and now.

[D_L_P]

My former employer was quite the bean counter. I'm sure many techs remember "TSON". Anyway, here is a ss of the manual explaining the toner save.

cot.jpg

[gensys]

My former employer was quite the bean counter. I'm sure many techs remember "TSON". Anyway, here is a ss of the manual explaining the toner save.

[ATTACH=CONFIG]9346[/ATTACH]

It is pleasant to see the professional answer.

[bakaoni666]

My former employer was quite the bean counter. I'm sure many techs remember "TSON". Anyway, here is a ss of the manual explaining the toner save.

[ATTACH=CONFIG]9346[/ATTACH]

WOW many thanks to You..
It much better now.