IRC3100 printing.

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • osmani
    Technician
    • Jun 2010
    • 38
    #1

    IRC3100 printing.

    How can I use IRC3100 to print at 300dpi? shall be thankful for any guidance.
    Tags: 100, dpi, irc, irc3100, print, printer, printing, scan, scanning
    • teckat
      Field Supervisor

      Site Contributor
      10,000+ Posts
      • Jan 2010
      • 16083
      #2
      Check under Add Functions-[Printer Settings> Settings> Print Quality>Resolution

      iRC3100
      Copying resolution 600 x 600 dpi
      Printing resolution 600 x 600 dpi

      Reading resolution 600 dpi (main scanning direction) x 600 dpi (sub scanning
      direction)
      Because of a specification constraint, [PDF (Compact)] cannot be selected if you select a combination of "Color Mode" and "Resolution" other than the following three.
      - Auto-Color Select (Full Color/Grayscale) 300x300dpi
      - Full Color 300x300dpi
      - Grayscale 300x300dpi
      If you want to select [PDF (Compact)] as a file format, select either of the combination's above.
      **Knowledge is time consuming, exhausting and costly for a trained Tech.**

        Comment

        • KenB
          Geek Extraordinaire

          2,500+ Posts
          • Dec 2007
          • 3945
          #3
          May I ask why you want to print at 300 DPI?

          Is 300 DPI not an option in the print driver? (I haven't seen a driver for that model in a really long time.)
          “I think you should treat good friends like a fine wine. That’s why I keep mine locked up in the basement.” - Tim Hawkins

            Comment

            • osmani
              Technician
              • Jun 2010
              • 38
              #4
              Thanks Mr.TECKAT. We use 300 dpi. to make screens for printing.

                Comment

                Previous template Next
                Working...