E000000-0001 ir3045

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • mrjobusa
    Technician
    • Apr 2006
    • 14
    #1

    [Error Code] E000000-0001 ir3045

    Book Suggest Dc controller, could it be the fixing unit?
    Tags: book, controller, dc controller, e00, e000, e0000, fixing, ir3045, roller, unit
    • teckat
      Field Supervisor

      Site Contributor
      10,000+ Posts
      • Jan 2010
      • 16083
      #2
      Originally posted by mrjobusa
      Book Suggest Dc controller, could it be the fixing unit?

      did u try to clear error in service mode ?
      how are the door switches ??
      did u check the fuser ??
      **Knowledge is time consuming, exhausting and costly for a trained Tech.**

        Comment

        • mrjobusa
          Technician
          • Apr 2006
          • 14
          #3
          Clear Error. it came into ready as soon as you select cassette or try to print, the error code

            Comment

            • mrjobusa
              Technician
              • Apr 2006
              • 14
              #4
              i'm thinking along the same line.

                Comment

                • dhanesh
                  Technician
                  • Jun 2010
                  • 63
                  #5
                  Hey replace the fixing thermistor yaar
                  DHANESH

                    Comment

                    • zoraldinho
                      teacher-guide-expert-guru

                      Site Contributor
                      5,000+ Posts
                      • Mar 2008
                      • 5005
                      #6
                      Did you try cold beer?
                      If it ain't broke, don't fix it
                      A picture is worth a thousand words

                        Comment

                        • Borsody75
                          Technician

                          50+ Posts
                          • Mar 2011
                          • 83
                          #7
                          You can measure the ceramic heaters via the 3 pole white connector. If you can't measure resistance on any of 3 pole, the heater is wrong.

                            Comment

                            • mrjobusa
                              Technician
                              • Apr 2006
                              • 14
                              #8
                              it was time for a new fixing unit. it solve the problem. Thanks to everyone for their input.

                                Comment

                                Previous template Next
                                Working...