Need Fuser for IR C-4080

[Jammin99]

Looks like our nused machine is going to need a fuser. Anyone out there know a good reliable source for one?

Thanks!

[teckat]

Looks like our nused machine is going to need a fuser. Anyone out there know a good reliable source for one?

Thanks!

Ebay/

refurbished=800.00/900.00
http://cgi.ebay.com/CANON-IRC5180-IR...item2a0f444a33
FM3-3778-00R= this is a Refurbished unit/ R850/900
FM3-0691-000= Canon original OEM new=1,500.00

never buy a unit that says it is USED/
If u can ,go for a Refurbished unit/they preform just as well as a new one

u may be able to order direct from Canon=900.00 +shipping
OR on eBay

do not buy from Precision Roller= too expensive

[Jammin99]

Thank you! I'll try to reach Canon and keep looking. I appreciate the advice.

[SCREWTAPE]

Where are you located?

[Jammin99]

Wilmington, NC 2 hours from Raleigh

[THUK]

Trade supply: Best prices for all copier spares and consumables
i found this one for you.

[Jammin99]

thanks so much! We'll look into that - it will depend on return policy. We might just end up parting the C4080 out to get some $ out the old gal instead of trying to save her... Now, I just need to look around to see what sites are available to handle that :-)

So many lessons to learn in all this.

Thanks all!