iRC2380 Configuring Network Scan Location Settings for

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • TheCake
    • Jul 2025

    #1

    iRC2380 Configuring Network Scan Location Settings for

    I have a client who has a Canon iR2380 and they have scan to network (drive on their server) and also scan to email. This was working faultlessly until recently when they have changed their admin password on their server - which their printer was obviously using and was hard-coded.... now, the scan to network no longer works.

    Now, scan-to-email is working fine so I've left them with this but I need to change the scan-to-network credentials so it uses its own login rather than the Admin one - but alas, can't work out how to do it.

    Any help appreciated.
  • TheCake

    #2
    Fixed!

    http://www.copytechnet.com/forums/co...ile-email.html

    Followed these instructions, very simple to follow and you can do it from the RUI (IP address front end) of the machine. Happy days.

    Comment

    • johnm@ucopier.com
      Technician
      • Jun 2010
      • 46

      #3
      i am having same issue, that link doesnt work.

      Comment

      • teckat
        Field Supervisor

        Site Contributor
        10,000+ Posts
        • Jan 2010
        • 16083

        #4
        Originally posted by TheCake
        Fixed!

        http://www.copytechnet.com/forums/co...ile-email.html

        Followed these instructions, very simple to follow and you can do it from the RUI (IP address front end) of the machine. Happy days.

        you need to put a correct link-back for that forum post
        **Knowledge is time consuming, exhausting and costly for a trained Tech.**

        Comment

        • gensys
          Trusted Tech

          250+ Posts
          • Jan 2011
          • 323

          #5
          [QUOTE=TheCake;219150]Fixed!

          http://www.copytechnet.com/forums/co...ile-email.html


          ??????????????????????
          The Road will be Mastered by >>> the Going...

          Comment

          Working...