[Misc] IRC3200

[msmy]

Hai guys,

I have problem with IRC3200.

When I print/copy the output result is differ compared to original (colour 50% differ).
I tried to calibrate the colour registration, but result as attached.

any idea?

Thank you. irc3200.JPG

[charm5496]

looks like you could use an ITB cleaner blade for the dirty streaks and possibly a magenta drum for the poor quality in that color.

I wouldn't run auto gradation or calibrate until your output is clean.

[Luther]

How old are the drums? they look a little worn especially magenta...check drum life

[teckat]

Agree with all other reply's on your post/

Probably need to clean inside entire Printer/Remove Cleaner Blade unit/ Remove all Drums Toner/ITB UNIT/Slide out Fuser unit & Remove Manual feed unit/& all Cassettes= Gut Printer/ is is easier to clean out all that waste toner spill / u also need to look in and Vacuum out that guide rail that the Cleaning Blade unit slides into.

also u Need to remove ITB Sheet/clean or replace if old/ clean those ITB metal plates when removed.May be best to replace entire Cleaner Unit

[msmy]

Thank you. I ordered parts as suggested two days ago.

[teckat]

Thank you. I ordered parts as suggested two days ago.

u still need to strip down printer and clean inside,
don't take a band-aid approach